The fluid in the car’s braking system runs from the master cylinder to the brakes Themselves mainly via rigid metal pipes. But there needs to be some flexibility in the System to allow the wheels to move in relation to …
Search Results for: clutch
Advertisement
What does happen when you skip gear in a manual transmission? Is it alright or causes any harm to the engine? Well, it’s a common practice for people who drive manual vehicles on a daily basis. They skip from second …
If a master cylinder is leaking replace it. The cylinder is usually mounted on the bulkhead Separating the engine and car interior. It may be fitted with a vacuum servo unit. The master cylinder is normally connected to the brake …
Internal-combustion engines run at high speeds, So a reduction in gearing is necessary to transmit power to the drive wheels, Which turn much more slowly. The gearbox provides a selection of gears for different driving conditions, Standing start, climbing a …
An automobile requires high torque when climbing hills and when starting, even though they are performed at low speeds. Read: STARTING AND CHARGING SYSTEMS On other hand, when running at high speeds on level roads, high torque is not required …
Like the electric locomotive, it has electric drive, in the form of traction motors driving the axles and controlled with electronic controls. It can operate over the same routes and can be operated by the same drivers. It differs principally …
Here are key symbols that should be on your fingertips 1. Indicator to push the clutch 2. Indicator to push the brake pedal 3. Locked steering-wheel 4. Full beam turned on 5. Low tire pressure 6. Sidelights on 7. Problems …
The third-generation hybrid transmission evolved on the basis of the 9G-TRONIC PLUS automatic transmission. The torque converter, clutch and electric motor are housed in the innovative hybrid drive unit. The remarkably compact design was achieved by integrating and connecting the …
Do you know why some people like to call diesels Satan’s engines? Yeah, rattling and soot were the most common reasons, despite not necessarily applying to modern engines, but another reason for that is the fact that they can betray …