Advertisement
Visit Our Friendly Website
Ads by Adsterra

What Is Vernier Caliper? Principle Of Working Of The Vernier Scale

What Is Vernier Caliper? Principle Of Working Of The Vernier Scale

The Vernier caliper is an extremely precise measuring instrument it is used to measure internal and external distances extremely accurately the error may be as little as 0.05 mm depending on the make.

The VERNIER is a small movable graduated scale for obtaining fractional parts of subdivisions on a fixed main scale of any measuring instrument.

With a normal scale, we may be able to measure down to 0.50 mm or while with a vernier scale the least count maybe 0.10 mm.

Usually, vernier calipers have both imperial (inches) and metric (mm) scales.

A vernier caliper is a precision measuring tool. It can be used for three types of measurements,

  • Outside distance (such as the length of an object).
  • Inside distance such as the width of a groove or the diameter of a large hole.
  • And depth, such as the depth of a hole or the height of a step.

Vernier calipers come in many sizes.

A common type measures 0 to 6 inches (ca. 15 cm).

Modern calipers are digital in the sense it has an LCD on which the reading appears,

There is no possibility of human error in reading the scale.

The smallest vernier caliper that can be bought Off-the-shelf is 150 mm meaning the jaws open to a maximum of 150 mm.

The largest ones go up to 2000 mm.

Principle Of Working Of Vernier Scale

The vernier scale works on the principle of using the alignment of line segments displaced by a small amount to make fine measurements.

The human eye can easily detect this alignment of lines which is the main fact that drives a vernier.

A vernier scale has a main scale and a vernier scale.

The main scale has the normal resolution with a least count of 1 mm.

The vernier scale is attached to the main scale which can slide on it and has graduations that are spaced by the same 1 mm only but are
slightly displaced to the marks on the main scale.

The displacement is the key here.

When the vernier scale is closed, that is, it is making a 0 measurement you will see that the zeros of the main scale and the vernier scale coincide.

But the first mm mark on the vernier is 1/10th mm short of the first mm mark of the main scale second mm mark of the vernier is 2/10th of an mm short of the corresponding main scale mark.

Similarly the third is 3/10th short fourth is 4/10th short until the ninth mark which is 9/10th of an mm short.

The 10th mark is 10/10th = 1 mm short of the corresponding mark of the main scale and therefore aligns with the previous main scale reading which is 9 (10-1) mm.

Now say you need to measure 5 mm.

The zero of the vernier scale will move 5 mm forward and align with the 5 mm mark on the main scale.

You will simply take the reading as 5 mm.

Now let us suppose we need to measure a length which is 5.4 mm.

You will slide the vernier scale to the requisite length.

The zero of the vernier scale will be slightly ahead of the 5 mm mark of the main scale.

Thus, 5 mm becomes the main scale reading.

The amount by which the zero of the vernier is ahead of the 5 mm mark is 0.4 mm which is 4/10th of an mm.

The first mark after the zero on the vernier scale which was earlier short by 1/10th of an mm will now march ahead by a net distance of 3/10th ( 4/10 – 1/10) of an mm of the corresponding marks on the main scale and will still be misaligned.

Similarly, the second one will march ahead by a net distance of 2/10th ( 4/10 – 2/10) of an mm.

The third one will be ahead by 1/10th (4/10-3/10) of an mm.

However, the fourth one which was previously short by 4/10th of an mm will now march ahead by 4/10th of an mm and come into alignment with the main scale mark.

This coincident mark can be seen by the naked eye and can be recorded easily.

Thus we say that the fourth mark of the vernier coincides with a main scale mark and thus the vernier scale reading is 4*1/10 = 0.4 mm.

Hence the total length measurement becomes 5 + 0.4 = 5.4 mm.

Ekster EU

One Comment

Add a Comment

Your email address will not be published. Required fields are marked *

Advertisement