The short answer is no. While they both carry out a similar function, they operate in different braking systems and have distinct advantages (and disadvantages).
Found in disc brake systems, brake pads are a flat piece of steel with a thick friction material layer on one side.
This type of friction material varies depending on the vehicle’s type and scale and the type of brake calliper.
The driver operates the disc brake system by pushing his foot down on the brake pedal.
That pushes against the master cylinder, which is basically a piston surrounded by brake fluid.
The fluid moves down the brake lines, forcing the calliper to squeeze a pair of brake pads against a brake disc.
That, in turn, slows the wheel down. The energy released from stopping your car’s motion is converted into waste heat, which has to be dispersed.
As the disc has a relatively quick cooling time, this brake type offers a better stopping performance than drum brakes.
The friction material layer becomes thinner over time, resulting from usage and eventually, the brake pads need to be replaced.
Brake shoes carry the brake lining inside brake drum systems.
They are a curved piece of metal, with a friction material fixed to one side.
When the driver applies the brake, a wheel cylinder in the drum brake system forces the brake shoe outward, against the inside of the drum.
This creates friction between the lining and drum, causing the car to brake.
The kinetic energy is dissipated as heat.
Brake shoes are often used for the rear axle, especially as most modern cars brake more sharply on their front wheels, so the temperatures the rear brakes need to handle aren’t so high.
As well as being less expensive to manufacture, drum brake systems can be more effective as a parking brake than disc brakes.
The main differences between brake pads and brake shoes are:
While you can’t mix and match on the same wheel – for example using brake shoes with disc brakes or brake pads with drum brakes – it is possible to have brake pads and shoes on the same car.
Many cars use a combination of the two, often smaller vehicles, with drum brake systems fitted on the rear axle and disc brake systems provided on the front axle.
Also, read: DIFFERENCE BETWEEN DRUM BRAKE AND DISC BRAKE
Also, read: The Importance of Measuring Brake Pad Thickness
More About Braking Systems
We see the words "drop forged" stamped on so many tools. It makes us wonder… Read More
The nomenclature used by each manufacturer to describe the size of the fastener or the… Read More