For understanding what a car radiator actually does, it may be useful to understand the method of the combustion engine protected by it.
A car engine consists of several moving components and there is friction where there is movement. Friction generates heat.
Motor oil is driven through the engine block for providing lubrication.
However, this is not enough for overcoming all of the surplus heat. As a result, engine parts become very hot as a part of normal function.
This is where the radiator system plays its role. The engine block has to be kept cool for preventing grave problems like a seizure or overheating.
If the pistons are not able to slide freely in the cylinders because of excess friction, they will snap eventually causing complete engine failure.
To stop this, a mixture of anti-freeze and water is pumped in the chambers of the engine block for absorbing the excessive heat and forcing it away from important parts.
Also, read : WINTER MAINTENANCE TIPS FOR EXPERT DRIVERS
Standing on the side of a road and watching smoke billowing out from the car’s radiator is not fun.
Before calling a costly tow company or changing into walking shoes, a technique is present to get back on the move.
After waiting for the car to cool down, open the bonnet and try to locate the source where the steam is coming out from. If the source is a rubber radiator hose, then a quick fix can be applied to it for getting out of the jam.
When the hole is found, it should be first dried completely.
Then tear out a 2 to 3 inch of duct tape piece and it should be placed on the hole in the hose.
Start from the center above the hole and firmly press the tape in place.
After that, tear along good piece what starts nearly 2 inches over the smaller tape piece, wrap it tightly around the hose and press it firmly in place.
The radiator fluid should be now checked just to make sure that there some left for making the drive back home. In case it is very low then ordinary plain water can be added for a temporary period.
Repairs or cooling system maintenance should never be performed on a hot vehicle. It can result in serious burns.
Don’t try to work it out for a few days trusting on the duct tape. It will make you regret.
Read More:
HOW TO FIX LOW COMPRESSION IN ONE CYLINDER
In the world of modern vehicles, the engine control system is a complex network that… Read More
When you hear "vehicle body mount," it's easy to think about all the flashy parts… Read More
Introduction The fuel injection system is a crucial component of modern internal combustion engines, responsible… Read More
The function of the rail is to distribute fuel pressurized by the supply pump to… Read More
Introduction The Engine Coolant Temperature (ECT) sensor plays a critical role in maintaining engine performance… Read More
Introduction If you own a diesel engine vehicle, the Diesel Injection Pump plays a crucial… Read More
View Comments