Advertisement Component Part Construction and Operation Component Parts Functions Rail Stores pressurized fuel that has been pumped from the supply pump and distributes the fuel to each cylinder injector. Pressure Limiter Opens the valve to release pressure if the pressure …
Tag: inspection
Advertisement When it comes to evaluating timing chains, whether they are new or old, there are several key factors to consider. The timing chain is a crucial component in an internal combustion engine, as it synchronizes the rotation of the …
Advertisement INJECTOR The G3-type Piezo injectors equipped in the Toyota AVENSIS can inject fuel at extremely high pressure (200 MPa). As a result, the atomization of the fuel mist from the nozzle has been improved, leading to increased combustion efficiency …
Advertisement SYSTEM OUTLINE: Construction and Operation 2AD-FHV, 2AD-FTV, 1AD-FTV The primary CRS components are shown in the figure below. SUPPLY PUMP The supply pump is equipped with an SV1 type suction control valve (SCV). The connector has changed from the …
Advertisement EXHAUST GAS PURIFICATION SYSTEM Configuration The exhaust gas purification system for the 2AD-FHV engine consists of the TOYOTA Diesel-Clean Air Technology (D-CAT) system, and the Exhaust Gas Recirculation (EGR) control system. For the 2AD-FTV, and 1AD-FTV engines (excluding CCO …
Advertisement Brake system inspection is an absolute must to ensure safe driving conditions. During a brake inspection the entire brake system is checked; this includes the following: the brake pedal, brake fluid, brake lines and hoses, and the brake assemblies …
Advertisement 1. CLEAN CYLINDER BLOCK (a) Using a gasket scraper, remove all the gasket material from the top surface of the cylinder block. (b) Using a soft brush and solvent, thoroughly clean the cylinder block. Read More: WHAT IS AN …
Advertisement Introduction: Replacing a timing belt is a critical maintenance task that ensures the smooth operation and longevity of your vehicle’s engine. While it is generally recommended to have this procedure performed by a professional mechanic, experienced DIY enthusiasts with …
Advertisement What you are looking at is SpaceBok – a rover robot prototype that is being developed by a team of students from ETH Zurich and ZHAW Zurich. It is undergoing tests at ESA’s ESTEC technical center in the Netherlands …