lean burn engines

In an ideal, 100 percent efficient internal combustion engine, the fuel would burn to give just carbon dioxide and water vapor. In practice, of course, engines are far from efficient and the combustion process. Also produces carbon monoxide, oxides of nitrogen, and unburnt hydrocarbons, as well as carbon dioxide and water vapor. Also, read How a diesel engine worksThe engine – how power is created Ford CVH Lean-burn engine In 1980 Ford introduced their CVH engine in the Escort 3 to replace the old five-bearing pushrod OHV Kent engine. The engine's designation derives from its design — Compound Valve angle, Hemispherical combustion chamber. Now the CVH has been re-engineered to make it an accurate lean-burn engine capable of running on air-fuel ratios of over 18:1. This meant a change in the cylinder head design to incorporate a lean-burn kidney-shaped combustion chamber to ensure a high mixture swirl and, therefore, complete fuel burning. These by-products of combustion are expelled as part of the car's exhaust gases into the atmosphere where they cause pollution. In recent years, public concern about atmospheric pollution, And imminent EEC pollution-control laws, has led to car manufacturers trying to find ways of reducing the level of these gases in car exhausts. Approaches There are two basic approaches to reducing harmful exhaust emissions - using lean-burn engines or attaching catalytic converters to the exhaust system. Lean-burn engines are designed to produce a lower level of harmful emissions by better combustion control and complete burning inside the engine cylinders. Catalytic converters clean up the exhaust gases coming from the engine. Catalysts are the older of the two systems and have been used in the US and Japan for some years. Catalysts Catalytic converters are fitted by the car manufacturer downstream of the engine in the exhaust system. It looks like a slightly swollen silencer and contains a fine metal or ceramic honeycomb, coated with platinum or a related metal, across which the exhaust gases flow. The platinum initiates a chemical reaction in which the harmful exhaust constituents are converted into harmless nitrogen, carbon dioxide, and water vapor. The problem with catalytic converters is that they sap engine power and reduce fuel economy. They also lead to increased maintenance costs. Another drawback is that the catalytic system needs unleaded petrol to work correctly because any lead in the exhaust gases quickly ruins the catalyst's efficiency. And some European countries, such as Britain, have none or very few outlets for unleaded petrol, with little hope of establishing a comprehensive network for distributing the new fuel soon. Inside the CVH combustion chamber Ford's lean-burn engine, based on the CVH, has a combustion chamber that is kidney-shaped — it looks somewhat like an off-center hemispherical chamber. This type of design ensures good breathing, and the enhanced 'squish' effect means that the fuel and air will be well mixed for ignition. The mixture is forced up and sideways into the chamber's kidney shape, rather than just being pushed into the more regular hemisphere of the earlier design. Leaner mixtures These problems have forced car manufacturers to look elsewhere for ways of reducing exhaust emissions. The most apparent avenue for reducing emissions is to burn less fuel in the first place. This requires an improvement in thermal efficiency, which is now very difficult to achieve because all the readily available routes have already been implemented. One remaining possibility is to produce a 'leaner' mixture, namely to reduce the proportion of fuel in the fuel/air mixture entering the engine. Fuel/air ratios Petrol burns best in a standard car engine mixed with air in the proportions 14.7:1 - nearly 15 parts of air to every one part of petrol. In practice, the mixture strength varies between about 13:1 and 16:1, depending on the speed of an engine and its load at the time. At these mixtures, engines produce fairly high levels of harmful exhaust gas emissions, particularly during initial acceleration. When you try to move away from the ideal fuel/air ratio, the engine's running is affected - if the engine is fed too much fuel, it produces smoke, wears out quickly, and is expensive to run. Suppose the engine is made to run too lean. In that case, combustion becomes exceptionally variable from one cycle to the next, exhaust gas temperatures rise because of the persistence of flames from 'late-burn' cycles. The engine starts to misfire frequently. All of these result in high levels of hydrocarbons in the exhaust gases. To overcome the difficulties in making an engine run well on leaner mixtures, the air/fuel mixture needs to be more intimately mixed. The actual spark timing and combustion process need to be very finely controlled. Engine management Some car manufacturers fit engine management systems where sophisticated electronics control both the ignition and the fuel delivery systems. This makes it possible to make sure that the spark plugs fire at just the right moment to ignite a new fuel/air charge, which may otherwise be reluctant to ignite. Also under development are engine parts made of new materials with more excellent heat resistance, such as pistons made of ceramics. But most development is going into ensuring that the air and fuel are well mixed. Stir the mixture In reducing the proportion of fuel in the mixture entering the engine, car manufacturers have encountered problems with misfiring and incomplete combustion, which have, in some cases, increased rather than decreased fuel consumption. The industry has tried different ways of `stirring' the mixture just prior to ignition to promote faster burning and complete combustion to get around these problems. There are three main ways of stirring the mixture. First, the engine's inlet ports can be shaped to cause swirl - a technique borrowed from direct injection diesel engines. Second, a deflector, or 'fence,' around which the mixture has to flow, may be positioned near the inlet valve or valves. And third, the combustion chamber itself can be made smaller than the cylinder bore to create what is known as a 'squish' effect - under compression from the upcoming piston, the fuel/air mixture has to squeeze itself into the combustion chamber, and this increases the density of the fuel droplets in the chamber. Working out how best to design the engine to cope with very lean fuel mixtures is complicated. Part of the problem is to see what goes on inside a combustion chamber when the fuel/air mixture is burning, particularly when the throttle is rapidly opened or closed. Researchers are now using a quartz window in the combustion chamber, combined with a cine camera and complex computer programming, to see exactly what is going on inside. From this, they can tell how and where the flame is spreading, which indicates how fully the mixture is burning. The way ahead Toyota's partial lean-burn system The latest Toyota engine, featuring turbocharging and supercharging and used in their FXV concept car, has the inlet ports for each cylinder separated into two — one straight and one spiral. At high engine speeds, both ports are open, but at low loads, a control valve in the straight port remains closed. All the mixture goes down the spiral port, creating a swirl effect in the combustion chamber. This swirl mixes the fuel and air more thoroughly. Individually controlled injectors very finely meter the mixture's fuel content to increase clean running still further. The current generation of lean-burn engines run on ratios of around 17:1 or 18:1, and the next generation should run with ratios averaging 20:1 or 22:1. But lean-bum technology still has some way to go before it fully meets the proposed EEC laws. Some manufacturers are proposing to use a combination of a catalyst and a lean-burn engine to meet the new regulations' demands. Fiat CHT engine Turbulence Grid A British company, Epicam, is developing a turbulence grid to help control the motion of the fuel/air mixture before it enters the engine. The grid is mounted on the inlet valve's upper surface, creating high-speed microturbulence in the mixture as it enters the combustion chamber. The grid's microturbulence has advantages over the eddies (turbulence) in current lean-burn engines. Large eddies can cause initial ignition problems and later in the engine's cycle when the ignited mixture can lose heat via a 'scrubbing' effect on the cylinder walls or even extinguish itself. A problem with the turbulence grid is that it can impede the engine's airflow, which reduces the power, but with careful design, it can help this to a minimum.

Tag: lean burn engines

Lean burn engines