Advertisement Component Part Construction and Operation Component Parts Functions Rail Stores pressurized fuel that has been pumped from the supply pump and distributes the fuel to each cylinder injector. Pressure Limiter Opens the valve to release pressure if the pressure …
Tag: Toyota Land Cruiser |Engine Mechanical | Inspection
Advertisement INJECTOR The G3-type Piezo injectors equipped in the Toyota AVENSIS can inject fuel at extremely high pressure (200 MPa). As a result, the atomization of the fuel mist from the nozzle has been improved, leading to increased combustion efficiency …
Advertisement SYSTEM OUTLINE: Construction and Operation 2AD-FHV, 2AD-FTV, 1AD-FTV The primary CRS components are shown in the figure below. SUPPLY PUMP The supply pump is equipped with an SV1 type suction control valve (SCV). The connector has changed from the …
Advertisement EXHAUST GAS PURIFICATION SYSTEM Configuration The exhaust gas purification system for the 2AD-FHV engine consists of the TOYOTA Diesel-Clean Air Technology (D-CAT) system, and the Exhaust Gas Recirculation (EGR) control system. For the 2AD-FTV, and 1AD-FTV engines (excluding CCO …
Advertisement Brake system inspection is an absolute must to ensure safe driving conditions. During a brake inspection the entire brake system is checked; this includes the following: the brake pedal, brake fluid, brake lines and hoses, and the brake assemblies …
Advertisement 1. CLEAN CYLINDER BLOCK (a) Using a gasket scraper, remove all the gasket material from the top surface of the cylinder block. (b) Using a soft brush and solvent, thoroughly clean the cylinder block. Read More: WHAT IS AN …
Advertisement 1. CLEAN TOP SURFACES OF PISTONS AND CYLINDER BLOCK (a) Turn the crankshaft, and bring each piston to top dead center (TDC). Using a gasket scraper, remove all the carbon from the piston top surface. (b) Using a gasket …