Advertisement Short Block and Long Block The cylinder block assembly (without the heads installed) is called a short block. The short block includes the crankshaft, piston and rod assembly, and ball bearings. On pushrod engines, the camshaft, timing sprockets, and …
Tag: VALVE TRAIN
Advertisement Introduction These instructions are based on the instructions supplied by Factory Tech with the purchase of the valve body. Always consult their installation instructions for any updates in the procedure. Goal The goal of this install is to improve …
Advertisement The valve mechanism opens or closes the intake valve and exhaust valve at the proper timing to input the air-fuel mixture into the combustion chamber space and output the combustion gas into the outside. The operation is provided by,pear-shaped …
Advertisement A practical guide to valve selection, covering the fundamentals of valve construction and application and analyzing the different hazards and requirements of various industrial fluid flow situations. Peter Smith, R. W. Zappe Table of contents: Introduction Fundamentals of valves …
Advertisement UPDATED… The major component in the Positive Crankcase Ventilation (PCV) system is the PCV valve, a simple spring-loaded valve with a sliding pintle inside. The pintle is tapered like a bullet so it will increase or decrease airflow depending …
Advertisement Introduction The main function of the valve train, as indicated by its name, is to control the opening and closing of the valves and, for older models, the fuel output of the injectors. Most of the heavy-duty diesel engines …
Advertisement The main function of the valve train, as indicated by its name Is to control the opening and closing of the valves and, for older models, The fuel output of the injectors. Most of the heavy-duty diesel engines we …