Visit Our Friendly Website
Ads by Adsterra

How To Replace Shift Knob? The Best DIY Method

Driving with wrong gearshift knob that comes off constantly is uncomfortable,
Frustrating, and dangerous. Why bear this entire struggle when you can fix it in no time? Yes, you read it right. Here is the best DIY method;
That will lead you to the answer of- how to replace shift knob?

So, let’s start the procedure of shift knob replacement now!

The fastest method for how to replace the shift knob

There could be numerous reasons to change your knob. But, the major thing that matters here is the right procedure to replace the knob. To make your driving smoother
And safer follow this top-notch procedure anytime.

1. Put on the Emergency brake

Safety comes first! For that reason, it’s preferable to set the emergency brakes first.
Of course, nobody would want the car to shift or
Move accidentally when you are in the middle of the mission;
How to replace the shift knob. So, ensure that you put on the emergency brakes before starting the procedure. After you have put the emergency brake,
Don’t forget to place the vehicle into neutral.
This way you will be able to encompass a better control over the gearshift
When you are pursuing the procedure.

2. Take off the knob.

The second step is to take off your old shift knob. Generally, there are two ways to do it. The first way includes inbuilt threading paced at the bottom of the knob. This threading is located inside the shifter as well. So, to remove the knob,
Just rotate the knob into a clockwise direction and you are good to go.

The second way includes removing the screw that is holding the knob to the shifter. You can even use a wrench to accomplish this task. This is how to remove shift knob in the right ways. Whichever method you prefer, just make sure you don’t leave any loophole behind.

3. Install the new knob carefully.

After successfully removing the knob from the gearshift,
It’s time to install the new knob. Depending on your method to remove the knob;
From the gearshift (that is unscrewing or unthreading),
The installation includes the same procedure respectively. To ensure that the knob is placed right, tighten it as much as you can. Now, shift through the gears to ensure that the installation has gone well.

It’s preferable to be sure about the placement of the knob,
So, it fits better when you have to change the gears. So, follow this amazing
How to change the shift knob method for a better driving experience.

Watch the below video to know how to install a new shift knob and shift boot in more details:


This procedure is a better and cost-effective way to replace the old knob with the new one. Ensure that you complete this quickest procedure of,
How to replace the shift knob carefully by following each step. In a worst-case scenario, use the maintenance tips or consult the experts.

Also, read:

sources – car from japan

Ekster EU

One Comment

Add a Comment

Your email address will not be published. Required fields are marked *