Visit Our Friendly Website

Why Is Your Car Making Noise When Reversing?

Have you been wondering why your car is making noise when reversing every time? 

It makes a squealing noise each time you back-up your ride. 

An old brake pad can often cause this as it rubs against the rotor and creates a high-pitched noise. 

It’s a warning that the brakes in your car need a change. 

To fix the issue, you can replace the old bake pad with a new one.

When in reverse gear, we will tell you the reasons why your car squeals. These will assist you in tracking down the exact cause, and better take care of the noise.

Why Is My Car Making Noise When Reversing?

If you hear the reverse sound of a vehicle, a brake problem might be the possible cause of this.

Whether or not this issue is severe, it needs your immediate action.

If you hear the brake noise while reversing the vehicle, the chances are that the brakes are not the only thing that affects your car’s smooth running.

You can follow the expert maintenance tips below to keep the vehicle going smoothly in reverse.

1. Clicking noise

Clicking is one of the most common noises you’ll hear while reversing the vehicle.

This car causing noise while reversing will arise as a consequence 

of the brake pads shifting to a new direction for travel.

However, too much movement between the pad abutment and caliper surface can lead to continuous noise. 

You can take care of that by adding a disk brake caliper grease. The grease lubricates the brakes and eliminates the noise.

The absence of anti-rattle chips could also cause a clicking noise.

Also, not replacing the anti-rattle chips while changing the brakes will lead to this noise.

Also, read:

Reasons for car making noise when reversing.

2. Check The Wear Tabs

In case you have not driven your vehicle brakes when driving longer distances, the first thing to check is the wear tabs.

If the car makes noise when backing up or even while moving forward, wear tabs might cause concern.

They are located at the end of the brake tabs and will rub against the rotor to create a squealing noise.

3. Check For Metal

Often you might wonder why cars are whining in reverse gear. 

A squealing noise can occur when the metal touches the metal.

Check the car rotor and pads, and if there is a small metal part between the two, the noise will be squealing.

Ensure that you clean the rotor and pads to prevent any metal part from getting in between both.

4. Examine The Grease Shims

Greasing Shims can lead to a squealing noise that your car can give out as it reverses. 

They need lubrication from time to time to suppress noise.

Ensure that you apply the lubricant on both sides of the greasing shims to avoid any problem with the brake pads. 

Remember not to use too much grease as it might lead to a large, sticky built-up.

The Conclusion

Thus, if the car makes noise when reversing every time, these tips can help you avoid an unnecessary headache.

These tips will ensure that your trip is smooth, whether you’re heading forward or reversing back to the garage.

Read More:

Ekster EU


  1. Satar kiman edzrael February 28, 2020 Reply

Add a Comment

Your email address will not be published. Required fields are marked *